Lantronix Industrial Device Server UD1100IA2-01

Lantronix UD1100IA2-01 Industrial Device Server is a tough and powerful tool that allows users to connect, manage, and operate nearly any piece of industrial equipment

Using an open Ethernet architecture as a standard provides the flexibility for equipment to communicate to virtually any type of industrial device.

Extending Serial Communications Across the Globe

When used in conjunction with an OPC server, most Windows based HMI, SCADA and PC-based control applications have full access to information in the industrial equipment networked by the Lantronix Industrial Device Server UD1100IA2-01.

This single-port Device Server is a quick, simple and inexpensive way to bring the advantages of real-time or on-demand information access.

Our approach to network-enabling devices is transparent to your attached equipment and software so you won’t need to change the way you work. Using a method called serial tunneling, the Lantronix Industrial Device Server UD1100IA2-01 encapsulates serial data into packets and transports it over Ethernet.

Standards Based Communications

• Includes Modbus TCP, ASCII, RTU and DF1 protocols;
• 15kV serial ESD protection;
• Wide -40°– 70°C operating temperature range;
• Environmentally-friendly RoHS and WEEE-compliant;

Serial tunneling can be done in multiple ways:

• Using Lantronix supplied Com Port Redirector software, Windows device applications not designed for network communications are re-directed to communicate to devices connected to the UDS1100-IAP.
• Connecting two UDS1100-IAP Device Servers configured to automatically talk to each other over the network creates virtual serial connections that can extend serial communications across a facility or around the world.

Built-in Web Server

The built-in web server enables users to access and configure the UDS1100-IAP from a standard web browser. Web pages enabling the UDS1100-IAP to be customized for unique applications can be built using Lantronix development tools. On-board Flash memory provides room for future system software upgrades and maintenance-free, nonvolatile web page storage.

Easy to Set Up and Use

The UDS1100-IAP can be set up locally through its serial port, or remotely using Telnet or a web browser. The included DeviceInstaller Windows-based configuration software simplifies setup and provides an easy way to:

• Assign IP & other network specific addresses;
• Load custom web pages;
• Enable web-based configuration of the Device Server;
• Ping or query the attached device(s) over the network;
• View specific device data files;
• Upgrade firmware;
• Simplify process of installing industrial protocols;

Complete with an auto MDI/MDIX Ethernet interface, the UDS1100-IAP is a powerful device communication solution that’s perfect for your most demanding industrial applications.

Modem Replacement

In modem emulation mode, the UDS is used to replace dialup modems. The unit accepts modem AT commands on the serial port. It then establishes a network connection to the end device, leveraging network connections and bandwidth to eliminate dedicated modems and phone lines.

RoHS logoRoHS-compliant, the UDS1100-IAP meets Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment. If you’re looking for a transparent, cost-effective, and scalable means to network-enable your industrial automation equipment, look no further than the UDS1100-IAP.