Fortin EVO-ONE-MAZ3 for select Mazda Push‐To‐Start

With Fortin EVO-ONE-MAZ3 for select Mazda Push‐To‐Start you can remote start your vehicle — precool in summer, preheat in winter

With this all-in-one Fortin EVO-Series package, selecting the ideal remote start system and installing it in your vehicle has been much easier and more cheap. The EVO-ONE-MAZ3 system comes with a T-harness that will link the digital interface module to your particular vehicle and bypass the immobilizer circuits in your car so you may start it without a key.

Vehicle-specific harness simplifies the installation

Although not quite plug-and-play, the harness connections drastically reduce installation time, allowing you DIYers to save a little money. On the box, Fortin gives a code that you may use to download and print thorough, illustrated installation instructions from their website. Moreover, Crutchfield provides free lifetime technical support via their toll-free line to assure the success of your remote start installation.

Use your factory remote

The lock button on your factory key must be pressed three times in order to start most vehicles. Using Fortin EVO-ONE-MAZ3 for select Mazda Push‐To‐Start, you can unlock and lock your doors from as far away as the key will let you. The majority of automobiles are compatible with this feature; but, in a small number of vehicles, the factory key will not function with the remote start system, necessitating installation of an RF kit.

Optional RF remotes increase the range

By simply connecting one of these RF remote kits to the interface module, you can increase your range so that you can start your car from within your house or place of business, for example. Two remote controls, an antenna module, and a harness are all included in each RF kit. In addition to starting your engine remotely, both kits allow you to lock and unlock your doors, open the trunk, and execute additional actions.

Integrates with your factory security system too

As you get inside your running automobile, the EVO-ONE-MAZ3 also provides you control over the fundamental features of your vehicle's factory security system, such as horn blowing, light flashing, and door locking.

A pioneer in the development and production of integrated consumer solutions for connectivity and control in vehicles, Fortin Electronic Systems. During the past ten years, Fortin has focused on producing interface and bypass modules for remote starting, keyless entry, and alarm system installations as well as automotive aftermarket electrical accessories.

What's in the box:

• Fortin EVO-ONE-MAZ3 owner's manual;
• EVO-ONE remote starter and alarm interface module;
• THAR-MA30 (Rev.1) harness;
• Valet switch with 36" wires (2-pin plug);
• Hood pin switch;
• EVO-ONE Quick Installation Guide;
• User Guide;
• THAR-ONE-MAZ3 Parts Included diagram;
• Wire Color activation key card;
• Warning/Attention sticker;