Rule Rule-Mate® 2000 GPH Fully Automated Bilge Pump - 24V

Rule-Mate 2000 GPH 24 Volt Fully Automated Bilge Pump

The Rule-Mate® 2000 GPH pump consists of a powerful Rule® bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1/2\" and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8\".

Rule-Mate Intelligence

Rule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water. This is a very unique feature to bilge pumps because it protects the pump and the vessel, especially the vessels batteries. If debris fouls the sensor or the pump becomes air-bound, the pump will stop running and begin to \"check\" for water every 2-1/2 minutes. Once the debris is removed, the pump will revert to its normal operation, turning on when the water reaches 2-1/2\" and shutting off at 5/8\".

• 2000 GPH (7570 LPH) at 0' (27.2V)
  
• All-in-one pump and switch
  
• Extra long life heavy duty motor
  
• 1\" NPS discharge with 1\" AND 1 1/8\" screw-on ports
  
• Three year warranty